Forum Replies Created
-
In reply to: GGG Racing Shirt Interest Thread!!!! **Closed**
13-Oct-2020 at 3:07 PM #10619Dwayne Smith
ParticipantI’m in for one!
In reply to: Belt Box Clips?
20-Feb-2020 at 11:53 AM #9508Dwayne Smith
ParticipantWhich costume are you referring to?
In reply to: **RUN CLOSED** 5” Inch– GGG Episode 9 patches
12-Nov-2019 at 7:45 PM #8738Dwayne Smith
ParticipantOrder is in ! Will these be available and shipped out prior to the premiere date?
In reply to: Where can I get a Captain Phasma Kit?
11-Dec-2018 at 6:24 AM #6318Dwayne Smith
ParticipantHi Ashley,
I believe Jim is at 850armorworks youcan try these links
In reply to: [2018-09-20] Current GGG stance with Other Peer Clubs
20-Sep-2018 at 3:50 PM #5646Dwayne Smith
ParticipantWhile I agree we should be focused on our own members
taking the stance of severing ties seems counterproductive to me. I think the door should be left open to possible future resolutions. I don’t see how this unites us or makes us stronger as a garrison.- This reply was modified 6 years, 5 months ago by Dwayne Smith.
In reply to: Tusken Raider (Bantha Rider) WIP
19-Apr-2018 at 6:03 AM #4276Dwayne Smith
Participant- This reply was modified 6 years, 11 months ago by Dwayne Smith.
In reply to: Sith Lord Question
18-Apr-2018 at 9:27 PM #4266Dwayne Smith
ParticipantHello Lokin72,
Are you still looking for assistance? sounds like you got several different versions of Vader going.In reply to: Tusken Raider (Bantha Rider) WIP
18-Apr-2018 at 5:30 PM #4265Dwayne Smith
ParticipantHere is the gaffi stick unassailabled for transport. Using 1” pvc I was able to I’m able to insert the end pieces inside the larger center staff piece. I glued magnets to the ends but fould wrapping a piece of gaff tape around the 1” shafts makes for enough friction to keep the head and tail piece in place.
Attachments:
You must be logged in to view attached files.In reply to: Tusken Raider (Bantha Rider) WIP
18-Apr-2018 at 5:25 PM #4262Dwayne Smith
ParticipantThe Gaffi stick, there are several tutorials out their for making gaffi sticks. I chose to keep mine light weight and detachable so I can break it down and fit it into my gear box. So I used 1.25” PVC for the main shaft and 3/4” for tail piece. The head is a 4” furniture leg and a tip I made using Smooth on kit and a mould I vacuumed formed.
Attachments:
You must be logged in to view attached files.In reply to: Tusken Raider (Bantha Rider) WIP
18-Apr-2018 at 5:04 PM #4259Dwayne Smith
ParticipantI dyed the duck cloth and ripped the material into various strips 1” to 2.5” wide. Ripping it worked better then cutting it because you get that frade end look which adds to it looking distressed. I used the same strips on the mask, arm wraps, neck wrap, and boots. Again hot glue worked well for attaching the strips. I found the more irregular I wrapped the cloth the better it looked.
Attachments:
You must be logged in to view attached files.In reply to: Tusken Raider (Bantha Rider) WIP
18-Apr-2018 at 3:34 PM #4256Dwayne Smith
ParticipantWith the mask completed I moved on to the outer robe. I’m doing the Bantha Rider version so I need only to do an inner robe. Standard male Tusken would need inner and outer robes. A tutorial for both robes can be found here:
http://www.studiocreations.com/howto/tuskenraider/main.html
I bought the monks cloth fabric and Rit dye’s at Walmart. Lighter tan for the base and varied shades of darker brown for the weathering and stains.
I’m not great at sewing which worked out well because I don’t need perfectly strait seams. The edges are destressed and tattered so it is necessary to sew a basting stitch about an inch above each edge to keep the loose ends of cloth from completely unraveling.
- This reply was modified 6 years, 11 months ago by Dwayne Smith.
Attachments:
You must be logged in to view attached files.In reply to: Tusken Raider (Bantha Rider) WIP
18-Apr-2018 at 5:44 AM #4244Dwayne Smith
ParticipantI used E-6000 glue and clamps to secure the metal parts and leather pieces to the mask. I found E-6000 would work for the duck cloth wraps as well however hot glue applied with a glue gun worked much faster.
- This reply was modified 6 years, 11 months ago by Dwayne Smith.
Attachments:
You must be logged in to view attached files.In reply to: Tusken Raider (Bantha Rider) WIP
18-Apr-2018 at 5:29 AM #4240Dwayne Smith
ParticipantI started first with the mask. I chose the kit by Godzilla. It has all metal parts, pre cut real leather, and a rubber mask large enough to fit most big heads. The step by step instructions that came with kit were pretty easy to follow. However the duck cloth is pre dyed. Since your head wraps have to match your arm and leg wraps. I’d pre dye and weather enough duck cloth for the mask head and leg wraps before getting started so everything matches.
- This reply was modified 6 years, 11 months ago by Dwayne Smith.
Attachments:
You must be logged in to view attached files.In reply to: Fellow ESB VADER’s
16-Apr-2018 at 9:22 PM #4223Dwayne Smith
ParticipantAny luck tracking down a new box yet?